850 Cold Roll Forming Machine

Home850 Cold Roll Forming Machine
  • Consectetur adipiscing elit.
  • Labore et dolore magna aliqua.
  • Quis nostrud exercitation ullamco laboris nisi.
  • A commodo consequat.

The products from roll forming machine looks very beautiful and have a high strength, its widely used as the roof of the factory, garden, hotel, exhibition center, etc!

Main Technical Specification

  • Size: 9300mmx2270mmx2400mm
  • Total Weight: About 12000kg
  • Controlling System: PLC
  • Forming Power: 7.5kw
  • Bending Power: 4.0kw+1.5kw+1.5kw
  • Cutting Power: 3.0kw
  • Material of rollers: 45#steel, quenched HRC 58-62
  • Material of roller shafts: 45#steel
  • Material of cutting blade: Cr12 steel
  • PLC Type: Siemens
  • Step of rollers: 13 steps
  • Feeding Width: 1000mm
  • Effective Width: 850mm
  • Thickness of the coil: 0.3-0.8mm
  • The depth of the groove: 63mm
  • Working speed: Straight sheet: 15m/min
  • Arch sheet: 13m/min
  • Sewing: 10m/min
  • Max span: 38m

Main Technical Specification

  • Size: 10400mmx2050mmx2000mm
  • Total Weight: About 9000kg
  • Controlling system: PLC
  • Main forming unit driving motor power: 7.5kw
  • Curving motor power: 4kw+1.5kw+1.5kw
  • Electric cutting power: 3kw
  • Material of roller: 45#steel, quenched HRC58-62
  • Material of roller shafts: 45#steel, adjusted
  • Material of cutting blade: Cr12
  • Step of rollers: 13 steps
  • Feeding Width: 600mm
  • Effective Width: 305mm
  • The depth of the groove: 109mm
  • Thickness of the coil: 0.6-1.5mm
  • Working speed: Straight sheet: 15m/min
  • Arch sheet: 13m/min
  • Sewing: 10m/min
  • Max span: 24m

Features of our RS-roll forming machine

  • All the rollers are forged form the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. The rollers have a high hardness and long operating life.
  • The power set to automatically transport the colored steel sheet is equipped in the forming press section which can press the colored steel sheet with the thickness of 0.6-1.6. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness which can make the sheet come out from machine is very simple. But the quality of the finished product can be guaranteed.
  • The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument .The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet ,which makes the operation simple and guarantees the quality and the dimensional precision.
  • The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG) It is convenient to install and uninstall the hoisting tool, its hoisting speed is quick.